Pet Wireless Containment System

$220.92
$165.69

Pet Wireless Containment System, Safe & Effective

  • NO MORE Neighbor Complaints
  • NO MORE Jumping Over the Fence
  • NO MORE Running Off


Résultat de recherche d'images pour "check icon"  Invisible fence is completely safe and harmless to your pet. An unlimited number of receivers supported at same time.This electronic wireless pet fencing system is one of the most reliable, cost-efficient pet containment systems available today. Rechargeable and waterproof receivers with soft durable straps The static mode of the collar is safe and harmless for your pet.

Résultat de recherche d'images pour "check icon"  Super Large Controllable Range - Have all your garden covered -  coverage adjustable Up To 550 yards radius at Max Setting. Transmitter is equipped with digital display device, which shows current signal intensity directly (0-100 levels).

Résultat de recherche d'images pour "check icon"  Collar Receiver works a full day cycle before you need to plug it - Receiver collar with automatic sleep function, 300 mA lithium battery, about 12 hours of standby time, about 8-9 hours of normal use when battery is full.

Résultat de recherche d'images pour "check icon"  One fits most dog sizes - the receiver collar fits dogs 8 pounds and up with neck sizes from 6 to 26 inches (Small/Medium/Large/Extra Large Dogs),

Résultat de recherche d'images pour "check icon"  No need to train your dog for weeks, - The receiver collar initiates training function automatically - The system works in 2 phases. Firstly, your dog will be warmed by SOUND, then it will be shocked by STATIC ELECTRICITY to go back to the "safety zone".

The signal intensity of transmitter can be adjusted from 0 to 100 levels, and the correspondent distance of receiver should be 22-550 yards.

Résultat de recherche d'images pour "check icon"  Your dog receiver initiates training function automatically

Résultat de recherche d'images pour "check icon"  Have your invisible fence working under 20 minutes

 

Features

  • Completely wireless system
  • Signal field is a circular boundary
  • Progressive warning tone
  • Variable field width control
  • Speed detect Anti-run through
  • Multiple collars operation
  • Waterproof & rechargeable receiver collar fits dog neck sizes 8 to 21 inches (20.32 cm - 53.34cm)
  • 100 Levels adjustable correction
  • Range: 500m

 

 

 

 

 

 

 

 

 

Indoor wall-mounted Transmitter
Rechargeable and Waterproof Collars
110-240V Power Adapter
Adjustable Strap
English User Manual
4 Contact Points (2 short & 2 long)
Testing Light Tool

PLEASE READ BEFORE PURCHASING 

Notice

  • THE receiver collar should be closed before cutting off the transmitter power
  • DO NOT leave the collar on your dog for more than 10 hours per day
  • NEVER perform set-up procedures when the collar is on your dog
  • KEEP the receiver collar away from children
  • DO NOT use if you suspect a low battery. A low battery may cause intermittent operation.
  • DO NOT touch the two screws on the collar before connecting the receiver and the transmitter, it is best to stuck the test light on the two studs before turning on the power, and if there is an electric light, do not touch the electric screw 

 

Warranty

  • 1 years manufacture warranty
  • Defective problem has to be submitted within 7 business days after product is delivered.
  • Shipping damage has to be submitted within 5 business days after the product is delivered.
  • Please show us photo or video if a problems should arise.

 

Set up your wireless fence

1.Power on transmitter or receiver collar
Press the Power button and hold 3 seconds to make sure transmitter or receiver collar turn on.


2.Pair the transmitter with receiver collar
Turn on the transmitter and press the power button shortly. It will display “1dp” and flashes, which indicates the transmitter is in status of pairing
Then, power on the receiver collar and press the power button shortly, it will receive the pairing signal from transmitter and start pairing, When the receiver issued a single sound of “Bi” and blue LED flashes once, the transmitter is pairing is successfully with THIS receiver collar.


Notice: You must press the transmitter and receiver collar SHORTLY, to make it in pairing status. Once you press and hold the power button for 3 seconds, the device will turn OFF.


3.Set up the remote control range
The remote control range is a straight distance between transmitter and receiver collar. For this wireless fence KD661,the max. distance is up to 500 meters. To set up the proper distance, you can adjust the power level of transmission signal.
Press button”+” or”-” on the transmitter, you can increase or decrease the power level from O to 100 degrees. the value you are setting will display on the screen.

The below table is the correspondence between the power level of the transmission signal and remote control distance. Please set  the proper power level according to the control distance you want.

Power Level

Remote Control  Distance

10

25m

20

50m

30

65m

40

80m

50

95m

60

115m

70

140m

80

170m

90

230m

100

500m

 

4.Verify the function of wireless fence system


To validate the fence system and remote control distance. Please follow as below steps:


1.Power on the transmitter and set the power level to 10;
2.Turn on the receive collar and take away from transmitter. It will release warning sounds “Bi-Bi”, while the receiver is about 20 meters far way.
3.After 3 times warning sound, it will change to static shock mode automatically. Take away the receiver and place the test LED on the contact  probes of receiver, the LED will turn on. lf the receiver collar is kept away, the shock intensity will be gradually increasing. As result, the LED will be brighter gradually.
5.Put the transmitter in right place
To avoid transmission signal strength and remote distance affected by the surrounding environment, please place the transmitter l.5 meter above the ground, and make sure there is no any metal wall around it.
6.lmportant Notice:
 During the system is running smoothly, the transmitter has been powered off somehow, the receiver will automatically start up warning sound and then static stimulation, which is similar that the receiver is beyond the setting range.

Reset Operation


1.Reset Transmitter: if the battery is full capacity, but the transmitter can't power on, please press the RESET button to restart it. Then it will be powered on.
2.Reset Receiver: when the batter is full capacity, but the receiver collar can't power on, please charge the receiver collar again for one or two seconds to make it RESET. Then it will be powered on.

 

Résultat de recherche d'images pour "check icon"  100% SATISFACTION:  Please feel free to contact us if you have any concerns with the Whouff Wireless Containment System, we will provide you the best service.

 

For all Free or Standard Shipping orders please allow up to 2 - 4 weeks delivery time.

For all Priority Expedited Shipping orders customers should expect to receive their item(s) in 3 - 5 business days. (not available on some items).

For all International Shipping , please allow up to 6 weeks for delivery time.

For all details regarding shipping, visit our Shipping Policy page.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page